Once you have installed the software on your computer you will need to follow these instructions to set the software to use the Sidekick connection.
The Sidekick is hands down the easiest and most reliable way to connect to your satellite phone as it requires no special drivers or modem configurations.
Step 1: Make sure you are connected to the Sidekick Wi-Fi signal.
Step 2: Launch OneMessage
Step 3: Open the Connections Settings. This can be done by clicking on settings icon ().
Step 4: Set the "Default Connection" to "Sidekick Dialer" and the "Type" to the corresponding satellite phone that your Sidekick is connected to.
Note: Select "Broadband Dialer" if you are connection to one of the following devices via a Sidekick Wi-Fi router and then select the actual device from the "Type" list:
Hughes BGAN
iFleetOn
Iridium OpenPort / Pilot
JRC Fleet Broadband
Sailor Fleet Broadband
Sailor FleetOne
Skipper Fleet Broadband
Wideye iSavi
If you are using your Broadband Satellite phone in an "always on" configuration you would just set the Default Connection to "Network Connection" (Recommended for marine applications.)
).